thickness planar

Home › Forums › Cabin Maintenance › thickness planar

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 26, 2014 at 1:50 pm #2838
    sspmoose
    Participant

    Hi I can’t see the message but if you are trying to contact me about the planer my email is marsha.meadows@att.net

    December 25, 2014 at 11:28 am #2831
    rweis
    Participant

    Thank you. I have been sanding with a low number grit to attempt to plane it flat via sanding. If you are here this week, I can bring the board by to get your opinion or try the planar.

    R/ Rob Weis
    rweis71@gmail.com
    (209) 890-7706

    December 22, 2014 at 11:04 am #2823
    sspmoose
    Participant

    I have one you can borrow if you are willing to change out the blade on it. I have the new blade. I plan to be up sometime this week.

    December 22, 2014 at 2:21 am #2821
    bigtreestechman
    Keymaster

    Call Bob Solomon of joinery at 9745. He might be able to help you out.

    December 21, 2014 at 5:14 pm #2820
    rweis
    Participant

    I have a couple of cherry wood boards that are cupped. Any suggestions who may have a thickness planar and be willing to run the boards through it in order to reduce the cupping?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.