safe access to fan on high ceiling

Home Forums Cabin Maintenance safe access to fan on high ceiling

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #4426
    1Buddy
    Participant

    Had the same issue, I called Angles Eletric to install remote.

    #4425
    jsschmitz
    Participant

    thanks for all the good advice.

    Where in the Arnold area would I rent scaffolding? Maybe Arnold Rental would have it?

    #4424
    gagacabin
    Participant

    My husband replace a ceiling fan in our cabin at 23 feet. He used scaffolding. Didn’t take long to set up the scaffolding either, was an easy fix after that.
    I didn’t scream once!!

    #4423
    caleach
    Participant

    I have the same kind of problem but I just have to replace the bulb. The first time I did it I used an extension ladder but will not try that again on a cathedral ceiling. The bottom of the fan is about 13 feet from the floor so I think I will rent a tall step ladder.

    #4421
    rswheeler1
    Participant

    My ceiling was about 20 feet. I used a 24 foot extension ladder which just touched the main beam with about 3 inches to spare. It was shaky, but I could let go of the ladder to install the ceiling fan. I assembled the fan on the floor, tied a rope to it and hauled it up when I got to the top of the ladder. I’d hire someone before I’d do it again. Too old for that stuff!
    Scott

    #4416
    Granite
    Participant

    Either ladder jacks or scaffolding

    #4415
    jsschmitz
    Participant

    I’ve got a ceiling fan on a high vaulted ceiling that I need to work on (add a remote control). My issue is how to get up there and work on it safely. It’s about 20 feet up. I can get there on an extension ladder, but that seems precarious as I will need 2 hands free to work on the fan as it is fairly heavy. If I were just replacing the bulbs this seems fine, but to access the whole fan seems challenging.

    Any suggestions? Is there a better ladder to use for this height? Scaffolding seems overkill, but maybe it’s not too hard?

    Some of you must have vaulted ceilings with a challenging height. How did you work on something up high?

    thanks

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.