Forum Replies Created
-
AuthorPosts
-
DogwoodParticipant
Bob that’s typical for the actuator to be slow. The valworx is also slow, takes mine about the same time. I think it’s because the motors are geared for torque to push against the incoming pressure from the utility.
The best part is the convenience. That will pay for itself for years to come.
BobParticipantInstalled two new ball valves along with the Econet valve robot. Installation was simple and the Econet robot operates the valves with no problem. They move a bit slow, but that’s fine. I think the Econet site states it can take 18 seconds to finish the cycle, but believe it’s shorter than that. I would guess not as robust as the Valworx option, but I like the idea of operating remotely (although my Xfifnity modem is currently failing!). I’ll post again if the product does not last long term.
- This reply was modified 5 years, 4 months ago by Bob.
DogwoodParticipantI am also super pleased with my valworx valve. It was great advice in this thread from jsschmitz. It has been reliable and convenient. I think the ultimate setup we discussed is a three way with it going to an external drain. Not only water off but system drained.
My latest upgrade was to a rinnai tankless to replace the original electric tank from 1966. The rinnai so far has been excellent. We do have hard water, but the rinnai has internal sensors and will display and error code when it’s time to flush it with vinegar. Also these newer tankless have internal heaters to protect themselves from freezing on or off. I need to find a ups to keep a few days power and I am good.
I am happy to donate my used eco net to another owner just let me know.
DogwoodParticipantAzbunch please email me I am interested prosise@hotmail.com
jsschmitzParticipantI’m extremely pleased with the Valworx motorized ball valve I put in. I’ve had 4 years with absolutely no problem with it. Like some of the others I didn’t have a place to put a mechanical linkage so an electrical valve made sense. Only once has the power been off when I wanted to operate it, and that was no big deal to use the manual bypass on it. Otherwise I just flip the switch to turn the water off or on. I wouldn’t hesitate to put in another. I hope the Econet works well for you.
AZbunchParticipantI would just like to have some room in my garage back…$100.00
Attachments:
AZbunchParticipantooops, I’ll try to resize…
AZbunchParticipantI have one…I don’t get up there anymore during the winter and it’s just taking up space.
BobParticipantHey Dogwood, thanks for the update. I did end up purchasing the Econet, they should arrive soon. For several reasons (age, spacing & missing handles!) I am having two new ball valves installed which takes care of one issue. My placement should be good, so as long as the Econet product is decent I’m good to go. Fingers crossed I won’t be crawling into the back corner under the house this winter.
DogwoodParticipantI ended up removing the eco net and took the hit and bought a motorized electric valve that runs off of 120 volts and put the switch inside the cabin. It was $300 bucks but it is super convenient. My problem with the Eco net was that my main ball valve was super hard to turn and was really old. The Eco net struggled to close the valve all the way and the connection via z wave wasn’t stable. So it made sense to replace the whole setup. I have a 4 foot tall crawl space and locating the valve somewhere to turn manual was not an option. You want to make sure the main is right where the water enters your building with the least possibility for freezing.
mr ellisParticipantI need to find an enclosed garage to rent, in BTV, for the winter. The car I need to “enclose” is not useful in snow and ice.
Contact me @ “mr.choctaw@gmail.com”
Thank you
BobParticipantI am finally getting around to putting in wifi controlled valves. Looking at the Econet IV valve and wondering if anyone has a long term review of the Econet product. Thanks for any guidance.
Snider Snow and StumpParticipantThank you! We are so fortunate to have clients like you..doing snow removal for you is always a pleasure. Thank you for supporting our business from the very beginning.
Jessica and Adam SniderladyknitterParticipantI have 2 2002 SkiDoo 600s for sale along with an enclosed trailer. I’m getting too old for all this fun!
Call Ira 209 595-8462.gagacabinParticipantIn my opinion, Snider snow removal service is the best in our area.
Yes, I have used others. Adam is reliable and dependable. Jessica (his wife) is very helpful if you call with an issue regarding the snow.
Our steep driveway has created some scary moments, it is always Adam to the rescue!
Looking forward to another snowy winter in this beautiful area. -
AuthorPosts